AS-11C Lidar Scanners Là dòng cảm biến lidar cao cấp chính hãng của AKUSENSE
Thông số sản phẩm
Cảm biến AS-11C Lidar Scanners
Model |
AS-11C | |
| Light source |
Infrared laser(905nm)
|
|
| Laser safety level |
Class 1 (GB7247.1-2012, Eye-safe IEC)
|
|
| Laser spot light diameter |
10mm
|
|
| Laser spot light scan angle |
10.0(H)╳2.0(V)mrad
|
|
| Scanning angle range |
360°
|
|
| Scanning frequency |
12.5Hz
|
|
| Scanning angle resolution |
0.5°
|
|
| Sensing range |
0.1m ~ 20m
|
|
| 10% reflectivity range |
15m
|
|
| Outdoor performance |
Indoor, anti – light, anti – dirt
|
|
| Rain fog and smoke penetration |
Supported
|
|
| Measurement error | System error (typical) |
±5cm（1m~15m）
|
| Statistical error (1σ) |
±2cm（1m~15m）
|
|
Built-in applicationRegional monitoring |
Monitoring mode: Point number monitoring / target width monitoring / contour monitoring
|
|
|
Monitor signal level: Attention / warning / alarm
|
||
|
Number of regional groups: 16 groups
|
||
|
Number of concurrent work area groups: 16 (max)
|
||
|
Can detect targets of any shape, support normal target self-learning function
|
||
| Self-test equipment |
Contents:Transparent cover dirt / block / high temperature / low temperature Output mode: Indicator + TCP packets
|
|
| Ethernet |
Rate: 10/100 Mbps; Network protocol: TCP/IP; Function: Device configuration / measurement data output /monitor signal output
|
|
| I/O Input |
Quantity：4; Type: Switching level input; High level range：10V~28V DC; Low level range：0V~5V DC Preset function: Monitor area selection (0x0 – 0xF); Regional monitoring disarm / forced alarm, active level: high level
|
|
| I/O Output |
Quantity: 4; Type: PNP switch output; Output voltage:Supply voltage;Power on: OFF;Device ready (OUT), active state: pass (High level), zone detection signal output (OUT2/OUT3/OUT4) active state: configurable
|
|
| Indicator light |
Quantity: 2; Definition: ERR (Device alarm: Fault/Abnormal ,Transparent cover dirty / block, high and low temperature, Dense fog); HTR (operation status indication: detection signal / self-learning ）
|
|
| Front panel button |
Quantity: 1; Definition: Shielded monitor signal output / start background self-learning /restart device
|
|
| Operating voltage |
12V~ 28V DC
|
|
| Power |
4.5W@DC 24V
|
|
Outer covering protection rank(IP) |
IP65(GB4208~2008)
|
|
| Insulation resistance |
1ＭΩ(GB16796~2009.5.4.4)
|
|
| Dielectric strength |
0.5KV(GB16796~2009.5.4.3)
|
|
| Weight |
0.5kg
|
|
| Dimension(L×W×H) |
86×85×59.5(mm)
|
|
| Electromagnetic compatibility(EMC) | Electrostatic discharge |
6KV (GB/T17626.2~2006，class 3)
|
| Fast bursts |
1KV (GB/T17626.4~2008，class 2)
|
|
| Electromagnetic field radiation immunity |
GB/T17626.3~2006，class 2
|
|
| Surge immunity |
GB / T17626.5-2008 Power interface: 1.2 / 50μs, 2KV / 1KA (Class 3) Ethernet interface: 10 / 700μs, 1KV / 25A (Class 2); I / O interface: 1.5 / 50μs, 0.5KV / 0.25KA (Class 1)
|
|
| Impact |
GB/T 2423.5
|
|
| Single impact |
15g, 11ms
|
|
| Continuous impact |
10g, 16ms
|
|
| Vibration |
GB/T 2423.10
|
|
| Frequency Range |
10Hz~150Hz
|
|
| Amplitude |
5g
|
|
| Humidity |
93%, +40℃, 2h（GB/T 2423.3）
|
|
| Operating temperature range |
-10℃~+45℃
|
|
| Storage temperature range |
-30℃~+70℃
|
|
| Ambient illumination range |
≤70,000lux
|
|
Công ty TNHH Công Nghiệp VCI là đại lý chính hãng, phân phối dòng sản phẩm cảm biến AKUSENSE /MEIJIDENKI tại thị trường Việt Nam.
Chúng tôi cam kết sản phẩm chính hãng chất lượng tốt nhất, thời gian giao hàng ngắn nhất và giá thành tốt nhất tới quý khách hàng.
Các dòng cảm biến VCI cung cấp bao gồm :
Fiber Optic Sensors. Photoelectric Sensors, Proximity Sensors, Slot Type Sensors, Laser Sensors. Ultrasonic sensor, Measuring Displacement Sensors, Area/Security/Obstacle Avoidance Sensors, High Precision Magnetic Sensors, Vibration/Inclinometer Sensors, Precision Contact Sensors, Temperature Sensor, Intelligent code reader
Liên hệ hỗ trợ : 0338831588
Email : [email protected]
Website : https://vci-industrial.com/
